Kremlin Rexson CYCLIX II Traducción Del Manual Original página 67

3. INSTALLATION
The agitation units are designed to be installed in a spray booth.

DESCRIPTION OF THE LABEL MARKING OF THE SINGLE-POST RAM
Marking according to
the ATEX directive
REXSON
CE
II 2 G c
REF.
Serie / Serial
MAX. PRES. (BAR/PSI)
Operating maximum temperature rise :

DESCRIPTION OF THE LABEL MARKING OF THE AGITATOR MOTOR
Marking according to
the ATEX directive
REXSON
CE
II 2 G c T5
REF.
Serie / Serial
MAX. PRES. (BAR/PSI)
KREMLIN REXSON
Name of the manufacturer
European conformity
II : group II 2 : class 2
Surface equipment meant to an area in which there is an explosive atmosphere
with an excessive mixture of air, gases and vapours, which can occasionaly build
up during normal operation.
G : gas
c : Protection by constructional safety
Part number of the unit
Number given by KREMLIN REXSON. The two first numbers indicate the
manufacturing year.
Maximum pressure

T  5° C
Name of the manufacturer
European conformity
II : group II 2 : class 2
Surface equipment meant to an area in which there is an explosive atmosphere
with an excessive mixture of air, gases and vapours, which can occasionaly build
up during normal operation.
G : gas
c : Protection by constructional safety
T5 : Surface maximum temperature : 100° C / 212° F
Part number of the unit
Number given by KREMLIN REXSON. The two first numbers indicate the
manufacturing year.
Maximum pressure
- 7 - N° : 578.038.120-UK-1408