Jimmy Styks Thresher Manual Del Propietário página 13

FIN-BOX STYLE FINS
FIN BOX style fin sets includes a center
stabilizer fin, screw/plate set and fin key. We
recommend removing fins after each use to
prevent damage to the fin, fin box and board.
FIN INSTALLATION
1.
SCREW
PLATE
With the mounting screw and plate loosely
attached to the fin, insert fin into the fin
box channel. Start with the back-side first
by sliding the rear horizontal pins into the
track channel.
FIN INSTALLATIO N
FIN KEY
FIN SCREW
AND PLATE
2.
Slide the fin completely into the fin box
channel and tighten the mounting screw
using the supplied fin key.
Q U E S T I O N S / C O M M E N T S :
1 - 8 0 0 - 3 7 0 - 0 7 4 5
13
STABILIZER FIN