Tangent EVO E5A Manual Del Usuario página 14

player), the volume bypass switch should be set to ON. Then the speaker will turn on when
a source is connected. If no signal is provided to the speaker for a period longer than 10
minutes, the speaker will automatically go into standby.
Specifications
Amplifier
Input Sensitivity/impedance:
Line output level/impedance:
Rated Output Power（RMS）:
Signal noise ratio:
Frequency Response:
Power supply voltage:
Rear panel inputs:
Rear panel outputs:
Rear panel switches:
Drivers
Woofer
Tweeter
Cabinet
Weight
Dimensions (H x W x D)
500mV/47Kohm
up to 500mV/2.2Kohm
20W (4Ω Load Resistance, THD 0.7%)
min. 90dB
40Hz～20KHz（+3/-1dB)
220-240VAC~50/60Hz
AC power input
3.5mm analog stereo jack input
3.5mm analog stereo jack output
Channel select switch
Volume bypass switch
5" fully shielded
25mm Neodynium soft dome
4,70kg
230 x 145 x 200mm
14