Important Safety Instructions - Tangent EVO E5A Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 93

Important safety instructions

WARNING: IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE
INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE UNIT. KEEP THIS
MANUAL FOR FUTURE REFERENCE. This unit was designed and manufactured with a
view to providing maximum safety for the user. Incorrect use of the unit may cause electrical
shock or fire. The protection devices built into this unit will protect the user if the procedures
below are observed in connection with installation, use and repair. This unit is fully
electronic and contains no parts that can be repaired by the user. DO NOT REMOVE THE
CABINET. RISK OF DANGEROUS VOLTAGE. ONLY QUALIFIED TECHNICIANS ARE
ALLOWED TO REPAIR THE UNIT.
Read the manual: Upon unpacking the unit, please read the manual carefully and observe
all the instructions given.
Power supply: Only the power supply indicated on the rating plate must be used for this
unit. If you are not sure which power supply you have, please contact the distributor or the
local electricity supplier.
Earthing or polarization: If the plug cannot be inserted properly into the socket, or if the
plug does not fit, the unit must not be used in your country.
Ventilation: The cabinet is provided with slots and openings to ensure ventilation and
reliable operation and to protect the unit against overheating. Do not block or cover these
openings. The openings must never be blocked, for instance by placing the unit on a bed, a
sofa, a carpet or similar surface.
Heat: Do not place the unit near sources of heat such as radiators, heat registers, ovens or
other units that produce heat.
Water and moisture: The unit must not be placed close to water, such as bathtub,
washbasin, kitchen sink or laundry tub, in a damp cellar or close to a swimming pool, etc.
Cleaning: Unplug the unit before cleaning. Do not use liquid detergents and aerosol
cleaning agents. Use a dry cloth.
Power cords: Wiring must be organized to prevent people from stepping on the cables and
to avoid pinching by objects placed on or beside them. Take special care around sockets
and plug boxes and where the power cords leave the unit.
Overloading: Make sure that wall sockets, extension cords and plug boxes are not
overloaded as this may lead to fire or electrical shock.
6

Publicidad

Tabla de contenido
loading

Tabla de contenido