Philips AVENT SCF355/07 Manual De Instrucciones página 4

ENGLISH
4
- Make sure you add water before you switch on the bottle warmer.
- Hot water can cause serious burns. Be careful when the bottle
warmer contains hot water.
- The accessible surfaces of the appliance may become hot during
use and are subject to residual heat after use.
- Do not move the appliance when it contains hot water.
- When the food or milk has reached the required temperature,
remove the bottle or container from the bottle warmer. If you leave
food or milk in the bottle warmer, the temperature of the food or
milk increases.
- Always check the food temperature before you feed your child.
Gently swirl the bottle and check by sprinkling a few drops on the
inside of your wrist.
Caution
- This appliance is intended to be used in household and similar
applications such as farm houses, bed and breakfast type
environments, staff kitchen areas in shops, offices and other working
environments, and by clients in hotels, motels and other residential
type environments.
- Unplug the appliance when it is not in use.
- The surface of the heating element is subject to residual heat after
use.
- Let the appliance cool down before you clean it.
- Follow the descaling instructions to avoid irreparable damage.
- Do not try to open or repair the appliance yourself. You can
contact the Philips Consumer Care Center in your country (see
www.philips.com/support).
- The food should not be heated for too long.
The production date code YYWW is located in the cord storage compartment in the base of the
bottle warmer.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure
to electromagnetic fields.