Trust OWH-003 Manual Del Usuario página 4

OWH-003 OUTDOOR HOUSING
EN
Read these simple guidelines. Faulty installation will invalidate any warranty that may apply to this
product.
FUNCTIONALITY
IP56 Waterproof box for a Trust SmartHome wall
switches.
1. Open the outdoor housing
Squeeze on the housing as the arrows indicate.
(note: squeeze on the bottom part of the transparent lid)
2. Affix the outdoor housing
Use the supplied screws to affix the outdoor housing on any desired location with a solid surface.
(Make sure no electric wires or water/gas pipes are in the path of the screws)
3. Weatherproofing the outdoor housing
Cover the screws with the supplied plastic caps to weatherproof the outdoor housing.
4. Install AWST-8800 or AWST-8802
Place the AWST-8800 or 8802 in the outdoor housing. When the wall switch clicks into place, the
product is ready for use.
Note: Remove AWST-8800 or AWST-8802
Place a small object beneath the AWST-8800 or 8802 in the outdoor housing and lift it out of the
OWH-003.
1
COMPATIBILITY
Only suitable for AWST-8800 or AWST-8802.