Teac SR-L100 Manual Del Usuario página 23

3 Press the Skip button (.or/) (or
turn the rotary knob) to select a
track, then press the PROGRAM
button.
The track is programmed, and the next
program number (P-02) is displayed.
< Repeat step 3 to program more tracks.
< You can program up to 64 tracks.
4
When the selection of track numbers
is completed, press the Play/Pause
button (G/J) to start programmed
playback.
< When the playback
programmed tracks has finished, or if
one of the following buttons is pressed,
the PROGRAM indicator will go off and
the program mode will be cancelled:
STOP (H), TUNER, AUX
The program is retained in memory until
the disc cover is opened or the
STANDBY/ON button is pressed. You can
return to the programmed playback by
pressing the PROGRAM button and the
Play/Pause button (G/J) in the stop
mode. (If another source was selected,
select the CD mode by pressing the CD
button beforehand.)
of all the
23