Safety Warnings - Apach ASM32F 2S 3PH Instrucciones Originales

SAFETY WARNINGS

Although the machine complies with the safety requirements of the reference standards, electrical,
mechanical, hygienic, it can be dangerous if:
 Used for purposes and conditions other than those provided by the manufacturer.
 Protections are tampered with.
 The prescriptions for: Installation - Commissioning - Use - Maintenance are not observed.
ATTENTION
In order to prevent dangerous conditions and / or possible injuries caused by: electric current,
mechanical parts, fire or of a hygienic nature, the following safety warnings must be observed.
A - KEEP YOUR OWN WORKPLACE IN ORDER.
The disorder involves a danger of accidents.
B - EVALUATING THE ENVIRONMENTAL CONDITIONS.
Do not use the machine in a humid, wet or insufficiently lit environment, near flammable liquids or gases.
C - KEEP CHILDREN AND NON-EMPLOYEES AWAY.
Do not allow them to approach the machine or the workplace.
D - USE THE MACHINE UNDER THE PLATE POWER AND FOR THE ONLY PERMITTED USE.
Without overload, it will work better and safer.
E - DRESS IN AN ADEQUATE WAY.
Do not wear loose clothes or accessories that can get caught in moving parts. Use non-slip shoes. For
reasons of hygiene as well as safety, for long hair use the appropriate mesh and gloves for hands.
F - PROTECT THE POWER SUPPLY CABLE.
Do not pull the cord to unplug the plug; do not expose the cable to high temperatures, in contact with
sharp edges, water or solvents.
G - AVOID INSURING POSITIONS. Search for the most suitable position that always ensures balance.
H - ALWAYS PAY THE MAXIMUM ATTENTION.
Observe your work. Do not use the machine when you are distracted.
I - EXTENDED OPEN AIR CABLES. They must not be used.
L - MACHINE IN FUNCTION UNATTENDED. It must not be left
M - DISCONNECT THE PLUG FROM THE SOCKET.
At the end of each use, before cleaning, maintenance or moving the machine.
N - CHECK THAT THE MACHINE IS NOT DAMAGED.
Before using the machine, carefully check the efficiency of the safety devices. Check that the moving
parts are not blocked, that there are no damaged components, that all parts have been correctly
assembled and that all conditions that could affect the correct operation of the machine are optimal.
O - MAKE THE MACHINE BY QUALIFIED PERSONNEL REPAIR.
Repairs must only be performed by qualified persons using original spare parts. Failure to comply with
these provisions may constitute an element of danger for the user.
P - THE LABELS ARE ANTI-ACCIDENTIAL DEVICES, therefore they must always be perfectly legible. If they
are damaged and illegible, it is mandatory to replace them
16