Electric Connection; Functioning; Safety Devices - Apach ASM32F 2S 3PH Instrucciones Originales

In the normal working conditions and to have the best exploration
of the potentiality of the machine, the operator needs the area
represented in pict. below

ELECTRIC CONNECTION

The machine is connected to the mains power supply by means of the supplied power cord, which must be
fitted by a specialized and qualified staff, with its 16 / 32 A for 3-pole cable (F, N, T) for single-phase and
4 / 5-pole cable (3F, T / 3F, N, T) for three-phase versions.
The mains socket must be easily accessible, it must not require any movement.
The distance between the machine and the socket must be such that it does not cause the power cord to
tension, also the cable must never be under the supports of the machine.
IMPORTANT
It is mandatory that the system is equipped with earth connection and differential switch in
compliance with the laws in force.

FUNCTIONING

SAFETY DEVICES

The machine is equipped with adequate safety devices made of fixed guards, and an adequate distance
between the bowl and the machine casing, with the scope of avoiding contact of parts of the human body
(upper limbs) with the rotating bowl during the work phase, to eliminate the risks of dragging or crushing.
The machine is equipped with a lid sensor on the open bowl, with the scope of avoiding contact of parts of
the human body (upper limbs) with the moving parts during the work phase, to eliminate risks of
dragging, crushing and abrasion.
DO NOT REMOVE THE GUARDS DURING USE OF THE MACHINE. THE MANUFACTURER
CANNOT BE HELS IN ANY WAY LIABLE FOR NON COMPLIANCE WITH THE
AFOREMENTIONED INSTRUCTIONS.
Whit reference to figure 8, the guards are:
I – moving protection grate
L – Device proving that the top and the
protection cover are up or down (only on tilting
head mixers)
M,M1 – Check pin of the top (down position,
only on tilting head mixers)
N – Device proving that the bowl is in or out
(only on tilting head mixers)
0 – Blocking disk of the bowl (only on tilting
head mixers)
19