Changing Batteries; Battery Tips - Cochlear Baha BP100 Manual Del Usuario

Ocultar thumbs Ver también para Baha BP100:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Changing batteries

When there is approximately one hour of remaining
battery power, 2 beeps/flashes occur 3 times to let
you know that soon the battery will need replacing.
At this time you may experience low amplification.
If the battery runs down completely, the sound
processor will beep/flash and then stop working.
Use one of the included batteries (zinc-air, non-
rechargeable) as a replacement. The batteries
included in the sound processor kit reflect Cochlear's
latest recommendations. Contact your hearing care
professional for additional batteries.

Battery tips

Battery life decreases as soon as the battery is
exposed to air (plastic strip is removed).
Battery life depends on daily usage, volume setting,
sound environment, program setting, and battery
strength.
20
To maximize battery life, switch off the sound processor
when not in use.
Keep extra batteries available if using an FM receiver as
they have high energy consumption rates.
If a battery leaks, immediately replace it.
Note: The inside of the battery door is lined with a
moisture barrier that prevents dust and water from
entering the sound processor. To ensure an effective
seal, Cochlear recommends replacing the battery door
every 6 months. In humid environments, replace the
battery door more frequently.
Contact your hearing care professional
for additional battery doors.
To replace the battery in BP100:
1
2
Gently slide the battery door downwards
until you feel a "click". You can now remove
the door.
3
With a fingernail, gently lift the battery
hatch open to expose the battery.
4
Remove the old battery. Use the included
magnetic removal tool if needed. Dispose
of battery according to local regulations.
5
Remove the sticker on the + side of the
new battery. Insert the new battery with
the + sign facing the + marked on the
processor's battery compartment.
6
Gently press the battery hatch closed.
7
Attach the battery door and slide it gently
back into its locked position.
Note: The battery hatch is permanently attached to the sound processor and provides
additional protection against dust and moisture. Extra care should be taken when opening or
closing to avoid accidental damage.
1
2
3
5
4
6
English
7
21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Baha bp110 power

Tabla de contenido