Istruzioni Instructions Anleitungen instrucciones Инструкции Instrukcja
Fix the rest of the rack, utilising a piece of rack
to maintain the pitch between joints (Fig.5).
Position the limit switch brackets on the rack
and, sliding the gate, adjust the position of the
brackets according to the opening and
closing
wanted.
Now
fix
the
brackets
permanently.
Fig.5
Manual manoeuvre: To move the gate manually proceed as described below (Fig .6):
1)Slide the lock cover back
2)Turn the key clockwis
3)Pull the handle until it is perpendicular to the motor
1
3
Fig. 6
10