Mopar 82212123AB Instrucciones De Montaje página 11

5. Remove the hinge nuts (2), lift the door (1) straight up
off the body hinges and remove the door (1).
6. Align the pins on the door hinges (2) to the holes in the
body hinges and position the half door (3) into place.
7. Install the hinge nuts (1).
Tighten the hinge nuts (1) to 9 N∙m (80 in. lbs.).
8. Route the wiring harness (1) through the interior B­Pil­
lar lower trim side.
9. Install the harness (1) to the footman loop (3) on the
B­Pillar.
10. Connect the door harness (2) to the body harness.
11. Install the access door (4) to the B­Pillar lower trim.
12. Repeat steps for opposite side.
Mar 30, 2009
11
K6860780 Rev.1