AND UA-1020 Guia De Inicio Rapido

UA-1020 / UA-1030T QUICK START CARD
1. Lay left arm on the table
with palm up. Place the
cuff on upper arm.
2. Fasten the cuff tight enough so
you can slide two fingers
underneath it.
3. Sit comfortably with arm resting on a flat
surface, elevated to heart level, palm up.
4. Press START button. (AC
Adapter or battery
installation required.)
5. Sit quietly as cuff inflates.
6. Wait for measurement to complete.
7. When measurement is complete, the cuff
deflates automatically.
1 - 2cm
8.
(0.5'')
• Measure at the same time every day.
• Sit in the same chair/position.
• Do not cross legs and keep your feet flat on
• Relax for several moments before measurement.
• Use the correct cuff size to get an accurate reading.
• Sit still during measurement – no talking, eating or
• Record your measurement in a logbook.
© 2011 A&D Medical. All rights reserved. Specifications subject to change without
notice. UA-1020/1030T-QSC-US-05/2011 REV. a
e systolic, diastolic pressure, and pulse rate
appear on the digital display.
the floor.
sudden movements
1-888-726-9966
www.andmedical.com