2. Insert stick into body
OPERATION:
Slide the power
switch to turn on
USE OF ACCESSORIES:
Floor brush:
The floor brush has two positions: one for hard/even surfaces and one
for soft/ textile surface.
Crevice nozzle & Brush nozzle:
For cleaning radiators, corners, edges and small gaps etc.
Maintenance:
1. Empty and clean the dust cup
2. Always operate the vacuum cleaner with dust cup installed.
3. Disconnect from electrical outlet before empting dust
4. Make sure the dust cap is emptied when full. Press dirt cup release
button then tilt dirt cup down and away from unit.
Switch
10
5. Grasp filter from the center, pull filter out of dirt cup then empty the
tank into waste basket.
Cleaning Filter:
1. Filter should be rinsed clean at last twice a year or when it becomes
visibly solid
2. Always operate the cleaner with filter installed; use without may
reduce suction or cause damage the motor
3. Disconnect from electrical outlet before removing filter
4. Do not use a washing machine for rinsing filter - do not dry with a
hairdryer
5. Pull filter supporter upwards to remove filter
6. Rinse filer in cool tap water
7. Make sure filter is completely dry before re-assembling
Dirt cup release
button
Dirt cup
11