Self-Test Function - LaserLiner MultiWet-Master Manual De Instrucciones

19
LCD backlight
LED display illumination can be varied
with 3 different settings:
AUTO: Display illumination switches off
during periods of inactivity and
switches on again automatically
for measurement procedures.
ON: Display illumination remains on
permanently.
OFF: Display illumination remains off
permanently.
The setting is stored and remains in effect
until it is changed manually.
20 Auto-Hold function
The last measurement value will continue to
display for about 5 seconds after removing
the device from the measured material.
During this period the LEDs will blink and
show the last measurement value.
21

Self-test function

1 sec
22 GB
8 x
1 sec
7 x
1 sec
6 x
+