Cequent 75528 Instrucciones De Instalación página 4

Remove the fascia door – Return to owner.
1.
Using fascia removing tools, remove rear side of wheel well trim. Remove (1)
bolt in corner of rear fascia over wheel well behind wheel well trim.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
2. If Equipped with Integrated Rear Fascia Exhaust Outlets, Remove Rear Fascia
(If not, skip to step 3) – On each side, remove (5) screws inside wheel well
toward rear and (1) screw on bottom of fascia near wheel well.
Under vehicle, remove (1) plastic rivet on inside of rear fascia toward center of
vehicle. Open tailgate, remove (2) bolts and (1) screw along tailgate seal below tail
lights.
Sheet 4 of 18 75528NP 7-8-16 Rev. B