Cequent 75528 Instrucciones De Instalación página 6

Install Central Fasteners – Install fasteners in central receiver bracket.
6.
Sandwich 1 spacer for each hole between the bracket and bumper.
With Bumper Weldnuts – (2) M12 bolts and (2) 1/2" conical
a.
washers
Without Bumper Weldnuts – (2) 1/2" bolts, (2) conical washers
b.
and (2) handle nuts.
If Equipped with Integrated Rear Fascia Exhaust Outlets – Refer to Step 2 & reverse the process .
9.
©2016 Cequent™ Performance Products, Inc. - Printed in Mexico
7. Tighten all M12 CL10.9 fasteners with torque wrench to 92 ft-lbs (125 N-m) &
Tighten all 1/2-13 GR 5 fasteners with torque wrench to 50 ft-lbs (68 N-m).
Proper torque is needed to keep the hitch secure to the vehicle when towing.
Raise Exhaust – Raise the rearward portion of the exhaust back into position and
8.
attach the rubber exhaust hangers ((2) on single exhaust or (4) on dual exhaust).
Sheet 6 of 18 75528NP 7-8-16 Rev. B