Connecting To A Tv/Projector - Onkyo BD-SP309 Manual De Instrucciones

Connecting to a TV/projector

You can enjoy high quality digital picture and sound using an HDMI cable. (Only TVs/projectors with an
HDMI terminal can be connected to this player.)
Make sure to use a certi¿ ed HDMI cable.
1. Be sure to turn off this Player and the TV/projector before making any connections.
2. Firmly connect an HDMI cable (commercially available) to the HDMI OUT terminal on the player (1)
and the HDMI IN terminal of the TV/projector (2).
NOTE
• In this player, "HDMI Video Out" is set to "Auto" as a default (see page 42). (Normally set to "Auto".) If
you don't get a stable image with "HDMI Video Out" set to "Auto", select the output resolution which
corresponds to the connected equipment.
• To enjoy 3D images, connection to a 3D compatible TV is needed.
• For connection to a TV/projector, refer to the TV/projector's operation manual.
After connecting
• If desired, connect audio equipment. (Page 17)
• If necessary, perform the Audio Video Settings. (Page 42)
• Refer to HDMI Control. (Pages 21 and 43)
• Prepare the desired disc or content and start playback. (Page 22)
Projector
HDMI cable
(commercially available)
TV
En
15