On-screen Error Messages
The following messages appear on the TV screen in case of an error during operation.
Error message
Cannot play.
Incompatible disc.
Cannot operate.
This USB memory is not
formatted properly. Please
format the memory in USB
memory management.
The Connected USB Memory
cannot be used. It should be
compliant with USB 2.0
En
56
Possible Error
• The disc cannot be played back with
this Player.
• If you load a disc which cannot be
played with this Player (i.e. a scratched
disc), or if you load a disc upside down,
this message will appear, and the disc
tray will automatically pop out.
• Occurs if the loaded disc cannot be
played because it is a non-standard
disc or scratched, etc.
• Occurs if an operation is incorrect.
• Occurs if there is a formatting error.
• Occurs if the USB memory is not
formatted with FAT 32/16.
• Occurs if USB memory not compliant
with USB 2.0 High Speed (480 Mbit/s)
is used (i.e. USB 1.0/USB 1.1).
Suggested Solution
• Check the disc, and load it
correctly.
• Remove the disc.
-
• Format the USB memory
again.
• Format the USB memory
with your PC.
• Connect USB 2.0 High
Speed (480 Mbit/s)
compliant USB memory.