Camera Bracket - Samsung SHR-1041 Manual Del Usuario

camera BracKet

The camera bracket can be used to install the camera on the wall, ceiling or shelf.
camera Bracket specification
Indoor
use
Wall or Ceiling
installation
57(W) x 47.2(H) x 100.5(L) mm/
dimensions
2.25(W) x1.86(H) x 3.95(L) inch
weight 130g (0.29 lbs)
operating
-10˚C ~ 50˚C (14˚F ~ 122˚F)
temperature
accessories Screw (M4 X L15) : 3 pcs
adjusting the camera Bracket
1. Choose an installation site that can sufficiently support the weight of
the equipments to be installed.
. Attach the camera bracket to the wall using the supplied screws
(M4 X L15). 4x15 sized screws wall or ceiling.
. Adjust the camera to target the video location and tighten the camera
bracket handle on the camera bracket. Install the camera on to the
male screw of the camera bracket by rotating the camera in
clockwise.
. Loosen the handle by turning it in counter clockwise direction and then
adjust the camera position. Tighten the handle, turning it clock wise,
and lock the camera in position.
.
Connect the camera cable to the camera.
Handle
Handle
English _1