Remote Controller - Samsung SHR-1041 Manual Del Usuario

installation

remote controLLer

Switches to search mode for video search. At the moment,
you should select an authorized user and enter the password.
If you press a channel number in real time monitoring or
search mode, the camera's input of the selected channel is
You will see various menu items including settings,
search navigation
Used to move between menu items in searching for or playing
Selects a split mode. You can select one from full-screen,
multi-split and sequence modes.
changing the remote control id
In a multi-DVR system using a single remote control, you can control only the DVR that matches the ID that
you have set using the ID button.
1. Press the ID button to check the ID of each of "ir remote controLLer" and DVR.
The defaults are 00 for the SYSTEM ID and 00 for the REMOTE ID, respectively.
The REMOTE ID and the SYSTEM ID can only be checked in Live mode.
. To change the REMOTE ID of the IR REMOTE CONTROLLER, press and hold the ID button while entering
a desired combination of two digits from 00 to 99.
. To change the ID of the DVR, refer to "controL device > system id". (Page 36)
. Press the ID button of the "ir remote controLLer" to check the ID.
M
If the system number defined in "CONTROL DEVICE" is different from the number specified using the remote
control, no other button than the [ID] buttons will operate.
10_ installation
search
power
Turns on or off the system.
channeL
displayed in full screen.
menu
search and backup.
recorded video.
view(disp)
rec
Performs the recording.
BacKup(archiving)
Switches to backup mode.
id
Used to separately control each DVR in a multi DVR system
by setting a unique ID for each DVR.
pLay
Plays the search screen or adjusts the speed.
return
Cancels the setting and moves to the previous screen.
enter
Selects a menu item or applies your setting.