Samsung SHR-1041 Manual Del Usuario página 41

simpLe recording
If you set <recording mode> to simpLe in <recording operations>, the recording mode will be
displayed "simpLe recording".
. Select <simpLe recording> and use the up/down
buttons ($%/ ENTER) to set a desired item.
record QuaLity : Set the recording quality.
•
Select one from LOW/STANDARD/HIGH/HIGHEST.
The recordable time may differ, depending on the
recording quality.
• record size : Set the recording resolution.
Fps : Set the frame rate per second.
•
time Bar : You can select a recording type for the time
•
line of each channel. Use the mouse to drag and drop a
time line or use the left/right buttons
(_+) on the front panel or the remote control to select a
time line and press [enter].
Select an item to record and click <oK>.
- continuous : Performs the recording continuously.
- motion : The recording will perform only if a motion is
detected.
To record a motion, set both <Sensitivity> and <AREA> in
"CAMERA>MOTION SENSOR". (Page 41)
- aLarm : The recording will perform only if an alarm
occurs.
To record an alarm event, set <ALARM> to <ENABLED> in "Event/Sensor". (Page 36)
M
The icon of applicable recording mode is displayed on the Live screen. (Page 18)
If you select no record type, the timeline record does not perform.
The record size affects the FPS.
record size
352 × 240
704 × 240
704 × 480
.
When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
CAM1
RECORDING
OPERATIONS
SIMPLE
RECORDING
MANUAL
RECORDING
CAM1
CAM1
CAM1
RECORDING
OPERATIONS
SIMPLE
RECORDING
MANUAL
RECORDING
CAM1
CAM1
possiBLe Fps
1, 2, 3, 7, 15, 30
1, 2, 3, 7, 15
1, 2, 3, 7
CAM1
RECORD SETUP
RECORD QUALITY
RECORD SIZE 704X240
FPS
0 6 12 18
CH1
CH2
CH3
CAM1
CH4
CONTINUOUS MOTION
APPLY
CAM1
CAM1
RECORD SETUP
RECORD QUALITY
RECORD SIZE 704X240
FPS
CONTINUOUS
0 6 12 18
MOTION
CH1
ALARM
CH2
CH3 CAM1
CAM1
CH4
OK CANCEL
NONE CONTINUOUS MOTION
APPLY
English _1
HIGH
15
24
ALARM
UNDO
HIGH
15
24
ALARM
UNDO