Toshiba XF355 Serie Manual De Instrucciones página 40

NOTE:
• These functions depend on the device connected.
• If you select the REGZA-LINK input source from the
popup window, some REGZA-LINK devices may
automatically turn on.
• When the television is switched on it will take a few
minutes for the REGZA-LINK icon to appear in the list,
when an HDMI cable is removed it will take a few
minutes for the icon to disappear.
• If the HDMI cable from connected equipment is changed
Enable REGZA-LINK in the REGZA-LINK setup menu
may need to be reset to On.
• If you change HDMI lead to connect device or HDMI
device setting, reset Enable REGZA-LINK item on the
REGZA-LINK setup menu from Off to On.
REGZA-LINK playback device control
With REGZA-LINK mode on your televisions remote control,
you can control the connected REGZA-LINK playback
device you are watching.
To control the REGZA-LINK input source first select the
equipment with REGZA-LINK input source selection, then
switch the mode on the remote control to REGZA-LINK
and press any buttons.
Device
mode switch
See page 6 for details on available remote control key
functions.
NOTE: The available functions depend on the equipment
connected. Not all the remote control keys may be
available. Please refer to the operation manual for each
piece of equipment connected.
REGZA-LINK one touch play
When connected equipment is switched on REGZA-LINK
will automatically detect the television through the input
selection. If the television is in standby it will be switched on
automatically.
These functions enable or disable can set on the REGZA-
LINK setup (see page 39).
NOTE:
• Even if the equipment is showing a menu the television
may automatically show the input source.
• This feature depends on the connected equipment and
television state.
Using REGZA-LINK
continued
REGZA-LINK system standby
If the television is turned off (standby mode), the television
will send a message to turn off (standby mode) all of the
REGZA-LINK devices connected to the television.
These functions enable or disable can set on the REGZA-
LINK setup (see page 39).
NOTE: This feature depends on the connected equipment
and television state.
REGZA-LINK system audio control
With your televisions remote control, you can adjust or
mute the sound volume of the speakers connected to the
television via an AV amplifier. First, set the remote control
mode switch to REGZA-LINK.
a
Set the Speaker Preference to Amplifier in the
REGZA-LINK menu.
b
Confirm that a connected REGZA-LINK device
(such as DVD player, etc) is selected for the AV
amplifier input source.
NOTE:
• These functions depend on the device connected.
• When you turn on the AV amplifier, change its input
source, or adjust the sound volume, the sound will be
output from the AV amplifier's speakers even if TV
Speakers has been selected. Turn the television off and
on again to output the sound from the TV Speakers.
• This feature may not work if the AV amplifier is operated.
40