Sauder 427463 Instrucciones De Montaje página 21

Step 17
Finish, fastening the TOP (L) to the ENDS (A and B). Use
å
two BUSHINGS (91M), WASHERS (13M), and BLACK
3/4" PAN HEAD SCREWS (85S) through the exact holes
shown in the LIFT TABLE MECHANISMS (23M) and into
the holes in the ENDS.
NOTE: Do not overtighten the SCREWS (85S).
å
www.sauder.com/service
L
23M
B
91M
13M
Do not overtighten
the SCREWS (85S).
23M
BLACK 3/4" PAN HEAD SCREW
(2 used for the BUSHINGS)
427463
If you're doing this to
help a friend, don't
leave without a bite.
A
13M
91M
85S
Page 21