Package Contents; Electrical Safety - DeWalt DW052 Manual De Instrucciones

ENGLIS H
• Always read and follow all manufacturer's
instructions regarding caulk or adhesive.
Failure to do so may result in personal injury.
Do not use the tool on a ladder.

Package contents

The package contains:
1 Cordless impact driver/wrench
2 Battery packs
1 Charger
1 Kitbox
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
Description (fi g. 1)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
INTENDED USE
The DW052, DW053, DW054, DW055, DW056
and DW057 Cordless Impact Drivers/Wrenches
are designed for professional impact screwdriving
applications.
The impact function makes this tool particularly
useful for driving fasteners in wood, metal and
concrete. DO NOT use under wet conditions or in
presence of flammable liquids or gases.
The cordless impact drivers/wrenches are
professional power tools. DO NOT let children come
into contact with the tool. Supervision is required for
those under 16 years of age.
a. Variable speed switch
b. Forward/reverse slider
c. Tool holder
d. Pistol grip
e. Battery pack
f. Release buttons
g. Charger
h. Charging indicator (red)
26
Charger
Your charger DE9130 accepts D
packs ranging from 7.2 to 14.4 V. Your charger
DE9116 accepts D WALT NiCd/NiMH battery packs
E
ranging from 7.2 to 18 V.

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
voltage corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your D WALT charger is double insulated
E
in accordance with EN 60335.
Mains plug replacement
(U.K. & Ireland only)
DANGER:
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an authorized
D WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be
marked at the connection points of most good
quality plugs. Attach the wires to their respective
points in the plug (see below). Brown is for Live
(L) (2) and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminals crews.
4
3
WALT NiCd battery
E
1
2