Electrical Safety; Package Contents; Description (Fig. A); Assembly And Adjustments - DeWalt DW682 Traducido De Las Instrucciones Originales

Electrical Safety

The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
i on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN60745; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced only by
D WALT or an authorised service organisation.
e
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead t o the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core
extension cable suitable for the power input of this tool (see
Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.

Package Contents

The package contains:
1 Biscuit jointer
1 Dust bag
2 Dust adapters
1 Pin spanner
1 Hex screwdriver
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
a
Read instruction manual before use.
g
Wear ear protection.
f
Wear eye protection
Blade diameter
Date Code Position (Fig. A)
The date code 17
is printed into the housing.
Example:
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/Off switch
1
Lock-on button
2
Top handle
3
Fence height adjuster
4
5 Dust extraction outlet
Adjustable fence
6
Anti-slipping pins
7
Plunge depth adjusting knob
8
Locking knob
9
Spindle lock
10
Star knob
11
Intended Use
; the
2
Your biscut jointer has been designed for making flat dowel
joints in wood and wood products.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
The biscut jointer is a professional power tool.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
sourcebefore making any adjustments or removing/
installing attachments or accessories. An accidental
start-up can cause injuryD
Adjustable Fence (Fig. C1, C2)
The adjustable fence
where the slots for the biscuits are cut. To set the fence height:
1. Slacken the locking knob
, which also includes the year of manufacture,
2021 XX XX
Year and Week of Manufacture
WALT
e
6 allows you to precisely set the point
9 .
EngLIsh
25