Menu Options - DeWalt DCT418 Traducido De Las Instrucciones Originales

EN GLI SH

Menu Options

Press the menu button (k) to view the menu options.
NOTE: At any time, the menu button may be
pressed to navigate up one level.
1. Press the right/down arrow button (j) or left/up
arrow button (h) to highlight the menu option.
2. Press the OK button (i) to confirm selection.
LANGUAGE SELECTION
1. Press the right/down arrow button (j) or left/up
arrow button (h) to select the desired language.
ENGLISH
ESPAÑOL
FRANÇAIS
DEUTSCH
2. Press OK button (i) to confirm selection.
VIEW TUTORIAL
The hand-held radar scanner includes a tutorial with
tips for best practices.
After completion of the tutorial, the hand-held radar
scanner will return to the main menu.
SOUND ON/OFF
1. Press the right/down arrow button (j) or left/up
arrow button (h) to highlight ON or OFF.
2. Press the OK button (i) to confirm selection.
48
DISPLAY VERSION
The hand-held radar scanner will display the product
software version.
Press the OK button (i) to exit.
RESET FACTORY DEFAULTS
1. Press the right/down arrow button (j) or left/up
ITALIANO
NEDERLANDS
POLSKI
Pycc
2. Press the OK button (i) to confirm selection.
3. If YES is selected, the hand-held radar scanner
4. Press the OK button (i) to confirm selection.
NOTICE: Changing to default setup
will erase current settings and restore
factory settings.
arrow button (h) to highlight YES or NO.
will ask for a second confirmation to restore
factory defaults. Press the right/down arrow
button (j) or left/up arrow button (h) to highlight
YES or NO.