Sinbo SK 2380 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
SINBO SK 2380
INSTRUCTION MANUAL
1. FEATURE
• 360 degrees cordless rotating base
• Stainless steel heating element
• Auto shut-off when water boils
• Automatic dry-boil, safety cut-out and over-heat protector
• With removable and washable filter
• Double transparent window with water level indicators
• Indicator light
• With cord-storage on base
• Capacity:1.OL
• AC 230V 50Hz 1000W
2. USAGE:
• Please put the power stand on a clear and smooth surface;
• Insert power cord plug into an alternating current of 220-240v.Please make sure the
cable is not in stretched tight, and please singly use the electrical outlet.
• Before using it for the first time, please fill the kettle with water to its maximum volume,
boil the water then move the water away. Rinse and clean the kettle with cold water for
once or twice so as to get rid of dirt yielded in the process of production and storage.
• When use the kettle, please add water between the max capacity and mix capacity,
then put the electrical kettle into the power stand. Please check that the kettle and the
power stand are not in gradient.
• Press down the button to "I", signal light gets on and heating process begins. The power
will cut off to "O" automatically after water boiled and stop boiling, signal light gets off!
• After lifting the kettle away from power stand the user can incline the kettle and pour
water out.
• Please pull out the power plug of power base if the kettle is not used for a long time
3. NOTES:
1. Do not fill the kettle beyond the "MAX" indication, if the kettle has been over filled,
there is a risk that boiling water will be ejected from the spout.
2. Boiling water can cause serious burns .Please take care when the kettle contains hot
water.
3. Keep the kettle and its cord well out of the reach of children and do not let them play
with the appliance .Prevent children from pulling at the mains cord. Do not let the mains
cord hang over the edge of the work surface.
4. If the cable is damaged please make replaced the cable by technician.
5. Please do not work at wet place or in the water.
- 6 -

Publicidad

Tabla de contenido
loading

Tabla de contenido