Mopar 82212789AB Instrucciones De Montaje página 3

7. In the engine compartment, route the ground wire por­
tion (3) of the fog lamp harness under the coolant re­
covery bottle to the ground block behind the bottle.
8. Remove a ground stud retaining nut (2), attach the
ground eyelet and install the ground stud retaining nut
(2).
9. Position the rest of the fog lamp harness (1) forward
of the coolant recovery bottle, and down to the front of
the wheel well area for access from under the vehicle.
10. Remove I/P silencer push­in retainers (1) and remove
the silencer (2) from below the glove box.
11. Open glove box door.
12. Push in on sides of the glove box bin (1) and lower
door.
13. Disconnect the tether and LED harness.
14. Pivot the glove box downward and disengage the
hinge hooks from the instrument panel.
15. Remove the glove box (1).
Feb 11, 2011
www.mopar.com
3
K6861239