Mopar 82212789AB Instrucciones De Montaje página 8

8
NOTE: The cavities in the BCM connectors specified
for the RH and LH fog lamp wires may be populated.
If so, the existing wires must be removed to install the
fog lamp kit wires.
40. Route the wires to the BCM connectors and insert the
LH fog lamp power circuit WT/YE into connector A (1),
cavity 1 (2), and install the connector housing.
41. Insert the RH fog lamp power circuit WT/DB into con­
nector D (2), cavity 13 (1), and install the connector
housing.
42. Position the BCM (1), and install the two fasteners (4).
43. Connect the electrical connectors to the BCM (1).
Feb 11, 2011
www.mopar.com
K6861239