Led Indication; Getting Started - Nebula Apollo D2410 Manual De Instrucciones

6. LED Indication

Button LED Status
Solid blue
Solid yellow
Solid red
Solid green
Flashing red
Flashing blue
Solid blue
09
Description
Power on / operating in projector
mode
Standby in projector mode
Charging
Fully charged
Low battery
Ready to pair / Bluetooth is pairing /
Bluetooth disconnected (Bluetooth
speaker mode)
Bluetooth connected (Bluetooth
speaker mode)

Getting Started

1. Placement
Place Nebula Apollo on a stable, flat surface in front of the projection
surface. For the best results, the projection surface should be white and
flat. The distance between Nebula Apollo and the projection surface
must be a minimum of 0.58 meters (23 inches) and a maximum of 3.08
meters (121 inches) to get a projection image between 20 and 100
inches.
• It is unnecessary to tilt Nebula Apollo towards the
T
projection surface. You can correct the projection image
with the built-in keystone correction.
• The distance between Nebula Apollo and the projection
surface determines the projection image size. For the best
result, position Nebula Apollo between 40 and 80 inches
away from the projection surface.
EN
10