Orkli OKSOL Manual De Instalación página 17

It is recommended to leave a free distance of at least 1-1.5 m. to the left of the system in order to
facilitate maintenance work:
Accessible free area = 1-1,5 m.
INSTALLATION OF THE SUPPORT FRAMES ON FLAT SURFACE
The OKSOL solar system must be installed using Orkli´s support frames designed for this purpose.
The support structure allows the assembly of OKSOL at inclinations of 20º, 30º, 40º and 50º, depending on
the anchorage position chosen for the rear support profiles (shown in red in the following drawings).
The holes in the steel profiles are identified to facilitate this assembly operation.
• Inclination at 20º:
• Inclination at 30º:
EN
17