Electric Cable Routing - Cervélo S3 DISC Manual De Instrucciones

ELECTRIC CABLE ROUTING

It is recommended that electric cabling and junction points be installed after the brake hose has been installed. These routing illustrations are intended as a
supplement to the manufacturer's installation instructions only. Please refer to the component manufacturer's service center or website for further information.
11
With the brake hose already in place, install two piece
Electric Wire and Brake Hose Guide on the non-drive
side. Route the down tube electric wire through the guide
down to the bottom bracket. Cover the drive side internal
cable port with the Down Tube Wire Hole Blanking Plug.