Cervélo S3 DISC Manual De Instrucciones página 36

Insert a long 5mm
hex key into the
lower end of the
holder to work as
insertion tool.
13
Pass the battery and
holder assembly through
the opening in the bottom
bracket shell and position
it, in the down tube, so that
the fixing nuts are located
over the mounting holes.
1. Apply Loctite 242 to the M3 fixing
screws
2. Pass M3 fixing screws through the
frame's downtube mounting holes,
so that they catch the fixing nuts in
battery holder.
3. Tighten only enough to secure nut
in holder.
4. Remove 5mm hex key.
5. Using 2mm hex key, tighten fixing
screws to maximum of 2.5 Nm.