ECRON RD40 AC Manual De Usuario página 35

and tighten it gently to bring both
sides of the grilles together. Do
not tighten the screw fully in
this step.
7. Press the fastening clips,
ensuring that they are correctly
positioned on the edge of
the grilles.
8. Finish tightening the small
screw that goes through the edge
of the grilles.
USER INSTRUCTIONS
Fitting the batteries in the
remote control
· Remove the battery
compartment cover located in the
rear part of the remote control.
· Fit 2 x AAA (1.5 V) batteries in
the correct polarity position (+/-)
as indicated inside the
compartment.
· Close the compartment
cover again.
· The batteries should not be
exposed to excessive heat such as
sunlight, fire, etc.
· Incorrect use of the batteries
may result in an electrolyte
leakage that will have a corrosive
effect on the compartment.
· Do not mix different types of
batteries, for example, alkaline
batteries and rechargeable batteries.
· Do not mix old batteries with
new ones.
· If the unit is not to be used for a
long period of time, remove the
batteries from the compartment.
EN
35