Appendix A - Inputs Cables; Specifications; Physical Characteristics - rcf PL60 Manual De Uso Y De Instalación

7. Appendix A- Input cables
For connecting the speaker use cables with an ade-
quate cross-section. The greater the distance
between the amplifier and the speaker, the larger the
connection cable cross-section should be.
To prevent inductive phenomena from giving rise to
humming or disturbance that jeopardize the effective
operation of the audio system, the speaker cables
should not be run together with electrical energy con-

8. Specifications

Acoustic system
Frequency range (-10 dB):
90 Hz - 20kHz
Frequency response (-3 dB):
110 Hz - 20 kHz
Horinzontal angle of coverage:
90°, average from 800Hz to 16kHz
Vertical angle of coverage:
90°, average from 800Hz to 16kHz
Directivity factor Q (DI):
8 (9), average from 800Hz to 16kHz
1
Sensitivity :
91 dB 1W @ 1 m
Calcutated maximum sound pressure (SPL):
106.5 dB @ 1 m (3.3 ft.), maximum power
Impedance:
70 V: 3300Ω - 1.5W; 1660Ω - 3W;
817Ω - 6W
100 V: 3300Ω - 3W; 1660Ω - 6W
Input voltage:
70V, 100 V
Selectable power values:
70V: 1.5 W - 3 W - 6 W
100 V: 3 W - 6 W
Disclaimer
RCF S.p.A. applies a company policy based on constant research and development. With the aim of constantly improving
our products, we reserve the right to make any aesthetic or functional modifications at any time and without prior notice.
RCF is a registered trademark of RCF S.p.A.
Any other trademark mentioned herein is a trademark or registered trademark of the respective owners, who we gratefully
acknowledge. ©2004 RCF S.p.A.. All rights reserved. Printed in Italy.
ductors, microphone cables, or low level audio lines
(e.g. LINE level).
To facilitate the ''in phase'' connection of the
speaker, use bipolar cables that have markings to
distinguish the polarity (e.g. insulation of different
colours, conductors of different colours, ect.).
To minimize the inductive effects (hum) due to cou-
pling with surrounding electrical fields, use cables
with conductors braided together.
Transducers
Extended range:
1 dual cone loudspeaker diam. 160 mm (6")

Physical characteristics

Main body:
Plastic material
Grille: Steel
Attachment system:
Flush-mount
Inputs: 5-pin terminal strip
Dimensions (diam. x depth):
Ø 204 x 75 mm (Ø 8.03" x 2.95")
Weight: 0.8 kg (1.8 lbs.)
Accessory
A1360 Base for surface mounting
1 Measured on the axis in free field, with input signal of 1 watt (2.83 V RMS @
8ohm) and referring to one metre of distance using the inverse square root
law. The sound pressure indicated represents an average from 300Hz to 3kHz.
9