Technical Data; Definitions: Safety Guidelines; Ec Declaration Of Conformity; English (Original Instructions) - DeWalt D25980 Traducido De Las Instrucciones Originales

BREAKER
D25980
Congratulations!
You have chosen a D WALT tool. Years of
e
experience, thorough product development and
innovation make D WALT one of the most reliable
e
partners for professional power tool users.

Technical data

Voltage
UK & Ireland
Type
Frequency
Power input
No-load beats per minute
Single impact energy (EPTA 05/2009)
Tool holder
Weight
Noise values and vibration values (triax vector sum) according to
EN60745-2-6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Chiselling
Vibration emission value a =
h,Cheq
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off or
when it is running but not actually doing
the job. This may significantly reduce
the exposure level over the total working
period.
Fuses:
Europe
U.K. & Ireland
D25980
V 230

Definitions: Safety Guidelines

AC
V 230/115
AC
3 The definitions below describe the level of severity
for each signal word. Please read the manual and
Hz 50
pay attention to these symbols.
W 2100/1800
BPM 900
J 52
28 mm hex
kg 31
dB(A) 95
dB(A) 106
dB(A) 3
m/s 2 4.8
m/s 2 1.5
EC-Declaration of Conformity
MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
BREAKER
D25980
D WALT declares that these products described
e
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-6:2010
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
english
19