English (Original Instructions); Technical Data; Cordless Impact Wrench; Definitions: Safety Guidelines - DeWalt DCF901 Traducido De Las Instrucciones Originales

EngLIsh
12V CORDLESS IMPACT WRENCH
DCF901, DCF903
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No load speed
Impact rate
Max torque
Tool holder
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841‑2‑2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
22
WALT one of the
e
DCF901 DCF903
V 12 12
DC
1 1
Li‑Ion Li‑Ion
min 2850 2850
‑1
min ‑1 3250 3250
Nm 338 338
mm 6.35 6.35
kg 1.0 1.0
dB(A) 89 89
dB(A) 100 100
dB(A) 3 3
m/s 16.5 16.5
2
m/s 2 2.5 2.5
EC‑Declaration of Conformity
Machinery Directive
12V Cordless Impact Wrench
DCF901, DCF903
D WALT declares that these products described under Technical
e
Data are in compliance with:
2006/42/EC, EN62841‑1‑2015 +AC:2015, EN62841‑2‑2 +AC:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
05.01.2021
a
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
WALT at
e
WALT.
e