Black and Decker KD455RE Manual Del Usuario página 5

A pilot hole guides the screw and prevents splintering or
distortion of the wood. For the optimum size of the pilot
hole, refer to the table below.
When screwing in hardwood, also drill a clearance hole
x
with a depth equal to half the length of the screw. For the
optimum size of the clearance hole, refer to the table
below.
Screw size Pilot hole ø
(softwood)
No. 6 (3.5 mm) 2 mm
No. 8 (4 mm) 3.2 mm
No. 10 (6 mm) 3.5 mm
Accessories
The performance of your tool depends on the accessory used.
Black & Decker and Piranha accessories are engineered to
high quality standards and designed to enhance the performance
of your tool. By using these accessories you will get the very
best from your tool.
This tool uses screwdriver bits and drill bits with a 1/4" (6.35 mm)
hexagonal shank. Piranha Super-lok accessories are designed
for use with this tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Regularly clean the ventilation slots in your tool using a
x
soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
x
Do not use any abrasive or solvent-based cleaner.
Protecting the environment
Tools
Black & Decker provides a facility for recycling
Black & Decker products once they have reached the
end of their working life. This service is provided
free of charge. To take advantage of this service
please return your product to any authorised repair
agent who will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at the
address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com.
Pilot hole ø Clearance
(hardwood) hole
2.5 mm 4 mm
3.5 mm 5.0 mm
4.0 mm 5.7 mm
Battery (fig. E)
If you want to dispose of the tool yourself, the
battery must be removed as described below and
Cd
disposed of in accordance with local regulations.
Do not short-circuit the battery terminals. Do not use
tools to remove the battery; only use your fingers.
If possible, operate the tool to run the battery down
x
completely.
Use a screwdriver to remove the clip (8).
x
Pull the front part off the tool.
x
Loosen and remove the screws on the handle clamshells.
x
Lift the batteries out of the tool.
x
Disconnect the wires from the battery terminals.
x
Place the battery in a suitable packaging to ensure that
x
the terminals cannot be short-circuited. Take the battery
to your service agent or a local recycling station. Collected
batteries will be recycled or disposed of properly.
Technical data
Voltage
No-load speed
Max. torque
Bit holder
Weight
Charger
Input voltage
Approx. charging time
EC declaration of conformity
Black & Decker declares that these products conform to:
98/37/EC, 89/336/EEC, 73/23/EEC, EN 50260, EN 55014,
EN 60335, EN 61000
L (sound pressure): 70 dB(A), L
pA
hand/arm weighted vibration < 2.5 m/s
Guarantee
Black & Decker is confident of the quality of its products and
offers an outstanding guarantee. This guarantee statement is
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.
ENGLISH
KC9024 KC36
V 2.4 3.6
DC
-1
min 150 180
Nm 2.4 3.4
6.35 mm hex 6.35 mm hex
kg 0.30 0.34
V 230
AC
h 12
(acoustic power) 85 dB(A),
WA
2
Colin Wills, Director of Engineering
BDCI, 4/F, 2 Dai Wang Street
Tai Po Industrial Estate
Tai Po NT, Hong Kong
5