Cisco Linksys WPC54GR Guia De Inicio Rapido página 4

A
If wireless security has been
enabled on this network, you
will see a wireless security
screen. If your network uses
WEP (Wired Equivalent Privacy)
encryption, the WEP Key
Needed for Connection
screen will appear. If your
network uses WPA Personal or
PSK2 security, a screen
will appear for one of
those encryption methods.
WEP Key Needed for
Connection
Select the level of encryption
you want to use, 64-bit or
128-bit. Then, enter a
passphrase or WEP key.
Passphrase - Enter a
passphrase, so a WEP key is
automatically generated. The
passphrase is case-sensitive
and should not be longer than
31 alphanumeric characters.
WEP Key 1 - For 64-bit
encryption, enter exactly 10
hexadecimal characters. For
128-bit encryption, enter
exactly 26 hexadecimal
characters. Valid hexadecimal
characters are "0" to "9" and
"A" to "F".
Then, click Connect.
4
All manuals and user guides at all-guides.com
WEP Key
Some older wireless
NOTE:
access points, routers, or
gateways may only support a
passphrase up to 16 characters
in length.