Mopar 82212906 Manual De Instrucciones página 123

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4
13. Remove the screw located on the outboard side at­
taching the steering column opening cover (1) to the
instrument panel structure.
14. Using Trim Stick C­4755 remove the steering column
opening cover (1) from the instrument panel.
15. Disconnect the electrical connector (3) from the Hands
Free Module (HFM) (2).
16. If equipped, disconnect the USB connector (1) from
the HFM.
17. Connect the factory wiring harness connector (2) to
the HFM overlay harness connector (1).
18. If equipped with USB, connect the factory USB con­
nector (4) to the USB extension harness connector
(3).
19. Route the overlay harness and extension cable along
the existing harness to the radio.
20. Using the supplied tie straps, secure the overlay wiring
harness and USB extension cable so that the wires will
not cause any noise or chafing.
Jun 03, 2011
K6861338

Publicidad

Tabla de contenido
loading

Tabla de contenido