Mopar 82212906 Manual De Instrucciones página 61

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2
1. Disconnect and isolate the negative battery cable.
2. Using Trim Stick C­4755 disengage the center trim
bezel (1) retaining clips.
3. Reach behind the bezel and disconnect all electrical
connections.
4. Remove the center bezel from the instrument panel.
5. Remove the radio mounting fasteners (1).
6. Pull the radio (2) out far enough to access the back of
the radio.
CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec­
tor could damage the cable or radio.
7. Disconnect the AM/FM antenna (2) and electrical con­
nectors (1).
8. If equipped, disconnect the navigation antenna (3).
9. If equipped, disconnect the USB connectors (4).
10. Remove the radio from the instrument panel.
Jun 03, 2011
K6861338

Publicidad

Tabla de contenido
loading

Tabla de contenido