CAUTION: Pulling the antenna cable straight out of the
radio without pulling on the locking antenna connec
tor could damage the cable or radio.
8. Disconnect the AM/FM antenna (2) and electrical con
nectors (1).
9. If equipped, disconnect the navigation antenna (3).
10. If equipped, disconnect the USB connectors (4).
11. Remove the radio from the instrument panel.
12. After removing the 10way connector (1) from the back
of the radio, secure it to the existing harness with a tie
strap (2).
13. Using Trim Stick C4755 remove and disconnect the
HVAC controls (1).
Jun 03, 2011
3
K6861338