Cleaning The Interior; Temperature Indicator - Electrolux ERG 29750 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

USE

Cleaning the interior

Before using the appliance for the first time, wash
the interior and all internal accessories with luke-
warm water and some neutral soap so as to remove
the typical smell of a brand-new product, then dry
thoroughly.
Use of the appliance/ freezer
Control Panel
ON/OFF
H
Appliance On/OFF light
I
Appliance button ON/OFF
J
Temperature setting button (warmest)
K

Temperature indicator

L
Temperature setting button (coldest)
H. Light ON/OFF
I. Button ON/OFF
ON:
Press the appliance button (I). The pilot light
(H) switches on.
OFF: Keep press the appliance button (I) until the
pilot light (H) and the temperautre indicator
switched off.
J - L. Temperature setting buttons
The temperature can be adjusted between -15°C
and -24°C.
By pressing the button (J or L), the current
temperature setting flashes on the indicator. It is
possible to modify the setting temperature only with
flashed indicator. To set a warmer temperature,
press button (J). To set a colder temperature, press
button (L). The indicator display the newly
selectedtemperature for a few seconds and then
shows again the inside compartment temperature.
The newly selected-temperature must be reached
after 24 hours.
ACTION
COOL
M
N
O
P
During the stability period by the first starting the
temperature displayed can not correspond to the
setting temperature. During this time it is possible
that the temperature displayed is lower than the
setting temperature.
K. Temperature indicator
During normal functioning the indicator shows the
warmest temperature inside the freezer.
Difference until 5°C inside the compartment are
quite normal.
Difference between the temperature displayed and
temperature setting is normal. Especially when:
-
a new setting has recently been selected
-
the door has been left open for a long time
-
warm food has been placed in the compartment
Do not use detergents or abrasive
powders, as these will damage the finish.
Action Freeze light
Action Freeze button
Alarm reset light
Alarm reset button
Attention!
Attention!
ACTION
FREEZE
31

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido