Ryobi CST-180M Manual De Utilización página 9

GB
F D
GENERAL SAFETY RULES
Keep cutting tools sharp and clean. Properly
■
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.,
■
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could result
in a hazardous situation.
BATTERY TOOL USE AND CARE
Ensure the switch is in the off position before
■
inserting battery pack. Inserting the battery pack
into power tools that have the switch on invites
accidents.
Recharge only with the charger specified by the
■
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
■
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away
■
from other metal abjects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
Under abusive conditions, liquid may be ejected
■
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
SERVICE
Have your power tool serviced by a qualified
■
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES
Always wear safety glasses with side
shields. Everyday glasses have only impact
resistant lenses. They are NOT safety glasses.
Following this rule will reduce the risk of eye injury.
E I P NL S DK N FIN GR
English
SPECIFICATIONS
Motor
Switch
Magazine Capacity
Staple Speed
Staples
Staple Size
- Crown Width
- Length
Battery pack (Not Included)
Charger (Not Included)
DESCRIPTION
1. Depth adjustment knob
2. Switch trigger
3. Handle
4. Activation foot
5. Low staple view window
6. Battery pack (Not Included)
7. Latches
8. Depress latches to release battery pack
9. Squeeze latches to open base
10. Staples
11. Decrease force
12. Increase force
OPERATION
6
H CZ RUS RO
Protect your lungs. Wear a face or dust mask
if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
Protect your hearing. Wear hearing protection
during extended periods of operation.
Following this rule will reduce the risk of serious
personal injury.
WARNING
Always wear safety goggles or safety glasses
with side shields when operating tools. Failure to
do so could result in objects being thrown into
your eyes, resulting in possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool.
The use of attachments or accessories not
recommended can result in serious personal injury.
PL SLO HR TR
18 V
Single Shot Trigger
84 staples
40 shots min -1
Type 50
10.8 mm
6.3 mm, 7.9 mm,
9.5 mm, 12.7 mm,
13.5 mm, 14 mm
BPP-1815M/BPP-1817M
BC-1815S/BC-1800