Using Your Headset; Charging The Headset - Logitech A0363D Manual Del Usuario

Linking to your Xbox
®
1. Make sure the headset is charged and turned off.
2. Plug the headset communicator into your Xbox
3. Turn on your Xbox ® .
4. Turn on your headset.
5. If your headset LED is blinking green, your headset is linked and ready for use.
6. If your headset loses the link to your Xbox
the headset LED will flash green continuously.
7. To re-establish the link between headset and communicator, press multi-function button and volume up
simultaneously. Headset LED will blink green every 3 seconds once link is re-established.
1. Cordless headset for Xbox ®
2. Headset Communicator
3. Xbox ® controller
Functionality & Specs
Technical Specifications:
• Full duplex communication
• Rechargeable lithium-ion battery
• Range: up to 30 feet
• Talk time: up to 7 hours
• Weight: < 1 ounce
4
English
controller.
®
communicator, you will hear a disconnect warning tone and
®
1
2
3

Using your Headset

Turning the headset on and off:
Push and hold the multi-function button for 3 seconds. The headset will automatically link to the Communicator.
If the LED blinks green, your headset is linked and ready for use. When the headset is on, the green LED will blink
every 3 seconds.
Adjusting headset volume:
Push volume up to raise it, or volume down to lower it.
To mute your voice:
Push the multi-function button (Do not hold). To disengage the mute, push the multi-function button.

Charging the Headset

1. When the headset battery level is low, the LED will flash red and you will hear a warning tone every
few seconds.
2. Turn off the headset and connect the power adapter.
3. Plug the power adapter into an electrical
outlet.
4. The charging LED will be orange when charging.
If the LED does not light, the connection is not
sufficient.
5. When the charging LED turns off, your headset is
fully charged. Charging can take up to 1.5 hours.
5
English