English (Original Instructions) - DeWalt DCM586 Traducido De Las Instrucciones Originales

HEDGE TRIMMER
DCM586
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Batteries & Chargers sold separately
Voltage
UK & Ireland
Type
SPM
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to
EN60745-1
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
Battery pack
Battery type
Voltage
Capacity
Weight
WALT one of the
e
DCM586
V 36
DC
V 36
DC
1
3700
kg 6.1
dB(A) 84.5
dB(A) 95.5
dB(A) 1.5
m/s 2 3.1
m/s 2 1.5
DCB496 DCB497
Li-Ion Li-Ion
V 36
DC
A 6.0
h
kg 1.88
Charger
Mains voltage
Battery type
Approx. charging time of
battery packs
Weight
EC-Declaration of Conformity
Machinery Directive
Hedge Trimmer
DCM586
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN ISO 10517:2009 +
A1:2013.
2000/14/EC, Annex V
DEKRA Certification B.V.
Meander 1051 / P.O. box 5185
6525 MJ ARNHEM / 6802 ED
ARNHEM, Netherlands
L
L
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
17/12/2015
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
36
signal word. Please read the manual and pay attention to
these symbols.
7.5
1.92
V
AC
min 120 (6 Ah)
kg
(measured sound pressure) 84.5 dB(A)
PA
uncertainty (K) = 3 dB (A)
(guaranteed sound power) 97 dB(A)
WA
EnGLIsH
DCB413
220-240
36 Li-Ion
150 (7.5 Ah)
0.82
WALT at
e
WALT.
e
29