Safety Precautions; Material Included - Rothenberger ROAIRVAC R17006116 Instrucciones De Uso

Ocultar thumbs Ver también para ROAIRVAC R17006116:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24

Safety precautions

1. Unit is intended for operator professionally well
trained, he must know refrigeration foundamentals,
cooling systems, refrigerants and possible damages
that equipments under pressure could cause.
2. Read carefully instructions in the literature, strict
observance of procedures is main condition for
operator safety, constant declared performances and
unit undamaging.
3. Wear safety glasses and gloves when handling
refrigerant; avoid contact with refrigerant, blindness
and injuries may result to operator.
4. Keep away from flames and hot surfaces; high
temperature decomposes refrigerant releasing toxic
contaminants very dangerous for environment and
operator.
5. Avoid skin contact; refrigerant has a very low boiling
temperature (approx. -18°C/-3°F) and freezing may
occurs.
6. Avoid inhaling vaporized refrigerant gas; it has a
narcotic effect.
7. Vacuum pump must always be suitably earthed.
8. Even if the pump temperature is not expected to rise a
high level during use, it is advisable to locate the unit
so that users cannot make contact with the casing, as
burns may result.
9. Vacuum pump is air cooled with integral fan; use only
where air can freely circulate.
10.During operations, do not vent refrigerant in
environment.

Material included

1 Vacuum pump
1 Cable
1 Mineral Oil bottle
1 Connector 1/4"SAE –F – 5/16"SAE –M
1 Connector 1/4"SAE –F – 3/8"SAE –M
Instruction
Instrucions for use
12
INSTRUCTIONS FOR USE
ENGLISH
Description
Vacuum pump for air evacuation of closed systems (air
conditioners, tanks, etc). This equipment is specially
designed for HVAC&R systems. The Double Stage of these
pump make it feasible to achieve the final vacuum level
requested for these type of systems. Besides, the solenoid
non-return valve avoids any oil mixture due to the
backflow after a power interruption or any other process
interruption.
General characteristics
Gas Ballast
1
Mis Filter
2
Oil level sight glass
3
Oil drainage plug
4
Vacuum Gauge and Solenoid Valve integrated
5
1 /4"SAE connection
6
ON/OFF
7
Cooling Fun
8
Characteristics label
9
A - B - C

Publicidad

Tabla de contenido
loading

Tabla de contenido