Orbea ORCA AERO OMX 2022 Manual Tecnico página 20

38 | ORBEA
ST E M
The compatibility of the assembly may differ
depending of the new stem´s geometry. The
new stem must allow for the gear and brake
lines to enter the adapter with a smooth
bend for a correct operation of the gears and
the brakes.
TECHNICAL MANUAL BLUE PAPER ORCA AERO · OMX 2022
ASSEMBLIES WITH STEMS FROM
OTHER MANUFACTURERS
When using the HS01 adapter with stems
from other manufacturers, no headset spa-
cers must be installed between the bottom of
the stem and the adapter. Any headset sapa-
cers must be installed between the headset
cover and the adapter.
10 mm
2 8 OC HS01 STD STEMS ICR HEADSETS ADAPTER
ART Nº: X882
ASSEMBLIES WITH THE OC2 ROAD STEM
(WITH A ROUND HEADSET SPACER BETWEEN
THE STEM AND THE ADAPTER)
28.2/29
5 mm
28.1
29 OC ICR STANDARD STEM ADAPTER GROMMET KIT
QTY. ART Nº: X883
HS01 adapter body 1
Two hole rubber grommet 2
One hole rubber grommet 2
ORBEA | 39
E N
When using the HS01 adapter with the OC2
external cabling stem, it may be necessary to
use a 5mm headset spacer (X405) to achie-
ve a correct bend of the gear a brake lines
before they enter the adapter. Consult the
OC2 Road stem spare parts list in the OC
Road Cockpit Components document from
Orbea´s website.
28.2/29
28.1
10 mm
QTY.
29.1 Two hole rubber grommet 2
29.2 One hole rubber grommet 2