Display Indications - oneConcept Beaufort Manual De Instrucciones

DISPLAY INDICATIONS

(X) Setting
1
Switch between the temperature display in ° C and ° F
High temperature alarm: Use +/- and ON/OFF to set the temperature
2
at which an alarm sound should be emitted. When the alarm is active,
a corresponding icon is shown on the display.
3
Low temperature alarm
Display of the highest indoor temperature measured so far (flashing).
4
Press and hold the display for 3 seconds to return to the normal
display.
Display of the lowest indoor temperature measured so far (flashing).
5
Press and hold the display for 3 seconds to return to the normal
display.
(X) = The number of times the display must be tapped to access the
corresponding settings
Indoor temperature
EN
39